31.240 : Mechanical structures for electronic equipment

Items 1 to 200 of 338 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • BS EN IEC 61969-3:2024 + Redline

    Tracked Changes. Mechanical structures for electrical and electronic equipment. Outdoor enclosures Environmental requirements, tests safety aspects
    1/30/2024 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN IEC 61969-3:2024

    Mechanical structures for electrical and electronic equipment. Outdoor enclosures Environmental requirements, tests safety aspects
    1/19/2024 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN IEC 61969-3, C93-476-3 (01/2024)

    Structures mécaniques pour équipement électrique et électronique - Enveloppes de plein air - Partie 3 : exigences et essais d'environnement, et aspects liés à la sécurité
    1/1/2024 - Paper - French - AFNOR
    Learn More
    €88.33

  • IEC 61969-3:2023

    IEC 61969-3:2023 Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
    11/20/2023 - PDF - English, French - IEC
    Learn More
    €132.00

  • IEC 61969-3:2023 + Redline

    IEC 61969-3:2023 (Redline version) Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
    11/20/2023 - PDF - English - IEC
    Learn More
    €173.00

  • DIN EN IEC 60286-3:2023-11

    Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:2022), German version EN IEC 60286-3:2022.
    11/1/2023 - PDF - German - DIN
    Learn More
    €158.04

  • DIN EN IEC 60749-39:2023-10

    Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components (IEC 60749-39:2021), German version EN IEC 60749-39:2022.
    10/1/2023 - PDF - German - DIN
    Learn More
    €85.79

  • BS IEC 63098-4:2023

    Transmitting and receiving equipment for radiocommunication. Radio-over-fibre technologies their performance standard Radio-over-fibre-based indoor distributed antenna system (DAS) 5G
    5/30/2023 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN IEC 60286-2:2022

    Packaging of components for automatic handling Tape packaging with unidirectional leads on continuous tapes
    5/25/2023 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN IEC 60286-2:2022 + Redline

    Tracked Changes. Packaging of components for automatic handling Tape packaging with unidirectional leads on continuous tapes
    5/25/2023 - PDF - English - BSI
    Learn More
    €382.00

  • IEC 63098-4:2023

    IEC 63098-4:2023 Transmitting and receiving equipment for radiocommunication - Radio-over-fibre technologies and their performance standard - Part 4: Radio-over-fibre-based indoor distributed antenna system (DAS) for 5G
    5/23/2023 - PDF - English - IEC
    Learn More
    €132.00

  • IEEE 2715:2023

    IEEE Guide for the Characterization of the Shielding Effectiveness of Planar Materials
    5/5/2023 - PDF - English - IEEE
    Learn More
    €74.00

  • IEEE 2715:2023

    IEEE Guide for the Characterization of the Shielding Effectiveness of Planar Materials
    5/5/2023 - Paper - English - IEEE
    Learn More
    €92.00

  • UNE-EN IEC 61969-1:2023

    Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines (Endorsed by Asociación Española de Normalización in May of 2023.)
    5/5/2023 - PDF - English - AENOR
    Learn More
    €64.00

  • BS EN IEC 61969-1:2023 + Redline

    Tracked Changes. Mechanical structures for electrical and electronic equipment. Outdoor enclosures Design guidelines
    4/27/2023 - PDF - English - BSI
    Learn More
    €235.00

  • BS EN IEC 61969-1:2023

    Mechanical structures for electrical and electronic equipment. Outdoor enclosures Design guidelines
    4/3/2023 - PDF - English - BSI
    Learn More
    €180.00

  • NF EN IEC 61969-1, C93-476-1 (03/2023)

    Structures mécaniques pour équipement électrique et électronique - Enveloppes de plein air - Partie 1 : lignes directrices pour la conception
    3/1/2023 - Paper - French - AFNOR
    Learn More
    €88.33

  • PD IEC TR 60297-3-1:2023

    Mechanical structures for electrical and electronic equipment. Dimensions of mechanical the 482,6 mm (19 in) series Technological schemes applications
    2/15/2023 - PDF - English - BSI
    Learn More
    €293.00

  • IEC 61969-1:2023

    IEC 61969-1:2023 Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines
    2/10/2023 - PDF - English, French - IEC
    Learn More
    €92.00

  • IEC 61969-1:2023 + Redline

    IEC 61969-1:2023 (Redline version) Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines
    2/10/2023 - PDF - English - IEC
    Learn More
    €120.00

  • IEC TR 60297-3-1:2023

    IEC TR 60297-3-1:2023 Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-1: Technological schemes and applications
    2/7/2023 - PDF - English - IEC
    Learn More
    €270.00

  • BS EN IEC 60286-3:2022 + Redline

    Tracked Changes. Packaging of components for automatic handling surface mount on continuous tapes
    1/27/2023 - PDF - English - BSI
    Learn More
    €454.00

  • BS EN IEC 60286-3:2022

    Packaging of components for automatic handling surface mount on continuous tapes
    1/17/2023 - PDF - English - BSI
    Learn More
    €348.00

  • NF EN IEC 60286-3, C93-013-3 (12/2022)

    Emballage de composants pour opérations automatisées - Partie 3 : emballage des composants pour montage en surface en bandes continues
    12/1/2022 - Paper - French - AFNOR
    Learn More
    €141.33

  • DIN EN IEC 61760-1:2022-12

    Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) (IEC 61760-1:2020), German version EN IEC 61760-1:2020.
    12/1/2022 - PDF - German - DIN
    Learn More
    €136.82

  • IEC 60286-3:2022

    IEC 60286-3:2022 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
    11/15/2022 - PDF - English, French - IEC
    Learn More
    €345.00

  • IEC 60286-2:2022

    IEC 60286-2:2022 Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
    11/15/2022 - PDF - English, French - IEC
    Learn More
    €270.00

  • IEC 60286-3:2022 CMV

    IEC 60286-3:2022 CMV Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
    11/15/2022 - PDF - English - IEC
    Learn More
    €588.00

  • PD IEC TR 60286-3-4:2021

    Packaging of components for automatic handling surface mount on continuous embossed tapes Auto Loading Feeder
    10/31/2022 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN IEC 60286-2:2022

    Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (Endorsed by Asociación Española de Normalización in February of 2023.)
    10/12/2022 - PDF - English - AENOR
    Learn More
    €75.00

  • UNE-EN IEC 60286-3:2022

    Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in February of 2023.)
    10/12/2022 - PDF - English - AENOR
    Learn More
    €98.00

  • DIN EN IEC 60917-1:2022-10

    Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard (IEC 60917-1:2019), German version EN IEC 60917-1:2019.
    10/1/2022 - PDF - German - DIN
    Learn More
    €115.33

  • DIN EN 60286-1:2022-09

    Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:2017 + A1:2021), German version EN 60286-1:2017 + A1:2021.
    9/1/2022 - PDF - German - DIN
    Learn More
    €92.62

  • 22/30433013 DC:2022

    BS IEC 63203-204-2. Wearable electronic devices and technologies Part 204-2. Electronic textile. Test method to characterize resistance change in bending test of e-textile systems
    5/26/2022 - PDF - English - BSI
    Learn More
    €24.00

  • BS EN IEC 61587-1:2022 + Redline

    Tracked Changes. Mechanical structures for electrical and electronic equipment. Tests IEC 60917 60297 series Environmental requirements, test setups safety aspects
    5/12/2022 - PDF - English - BSI
    Learn More
    €454.00

  • BS EN IEC 61587-1:2022

    Mechanical structures for electrical and electronic equipment. Tests IEC 60917 60297 series Environmental requirements, test setups safety aspects
    5/10/2022 - PDF - English - BSI
    Learn More
    €348.00

  • BS EN IEC 61587-6:2021 + Redline

    Tracked Changes. Mechanical structures for electrical and electronic equipment. Tests IEC 60917 60297 series Security aspects indoor cabinets
    5/9/2022 - PDF - English - BSI
    Learn More
    €326.00

  • BS EN IEC 61076-3-122:2021 + Redline

    Tracked Changes. Connectors for electrical and electronic equipment. Product requirements Detail specification 8-way, shielded, free fixed connectors I/O data transmission with frequencies up to 500 MHz current-carrying capacity in industrial environments
    3/23/2022 - PDF - English - BSI
    Learn More
    €382.00

  • UNE-EN IEC 61587-1:2022

    Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects (Endorsed by Asociación Española de Normalización in March of 2022.)
    3/1/2022 - PDF - English - AENOR
    Learn More
    €90.00

  • NF EN IEC 61587-1, C93-471-1 (02/2022)

    Structures mécaniques pour les équipements électriques et électroniques - Essais pour les séries IEC 60917 et IEC 60297 - Partie 1 : exigences environnementales, montages d'essai et aspects liés à la sécurité
    2/1/2022 - Paper - French - AFNOR
    Learn More
    €153.67

  • IEC 61587-1:2022

    IEC 61587-1:2022 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety aspects
    1/7/2022 - PDF - English, French - IEC
    Learn More
    €311.00

  • BS EN IEC 61760-2:2021 + Redline

    Tracked Changes. Surface mounting technology Transportation and storage conditions of surface devices (SMD). Application guide
    12/23/2021 - PDF - English - BSI
    Learn More
    €235.00

  • PD IEC TR 60286-3-3:2021

    Packaging of components for automatic handling surface mount on continuous paper tapes Auto Loading Feeder
    11/19/2021 - PDF - English - BSI
    Learn More
    €250.00

  • 21/30447587 DC:2021

    BS EN IEC 61969-3. Mechanical structures for electrical and electronic equipment. Outdoor enclosures Part 3. Environmental requirements, tests safety aspects
    11/19/2021 - PDF - English - BSI
    Learn More
    €24.00

  • DIN EN IEC 62966-2:2021-11

    Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements (IEC 62966-2:2020), German version EN IEC 62966-2:2020
    11/1/2021 - PDF - German - DIN
    Learn More
    €104.95

  • IEC TR 60286-3-3:2021

    IEC TR 60286-3-3:2021 Packaging of components for automatic handling - Part 3-3: Packaging of surface mount components on continuous paper tapes for Auto Loading Feeder
    10/22/2021 - PDF - English - IEC
    Learn More
    €173.00

  • IEC TR 60286-3-4:2021

    IEC TR 60286-3-4:2021 Packaging of components for automatic handling - Part 3-4: Packaging of surface mount components on continuous embossed tapes for Auto Loading Feeder
    10/22/2021 - PDF - English - IEC
    Learn More
    €219.00

  • DIN EN IEC 62610-6:2021-10

    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor cabinets (IEC 62610-6:2020), German version EN IEC 62610-6:2020
    10/1/2021 - PDF - German - DIN
    Learn More
    €104.95

  • UNE-EN IEC 61760-2:2021

    Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide (Endorsed by Asociación Española de Normalización in October of 2021.)
    10/1/2021 - PDF - English - AENOR
    Learn More
    €65.00

  • BS EN IEC 61760-2:2021

    Surface mounting technology Transportation and storage conditions of surface devices (SMD). Application guide
    9/10/2021 - PDF - English - BSI
    Learn More
    €180.00

  • IEC 61760-2:2021

    IEC 61760-2:2021 Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
    7/16/2021 - PDF - English, French - IEC
    Learn More
    €92.00

  • IEC 61760-2:2021 + Redline

    IEC 61760-2:2021 (Redline version) Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
    7/16/2021 - PDF - English - IEC
    Learn More
    €120.00

  • UNE-EN 60286-1:2017/A1:2021

    Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (Endorsed by Asociación Española de Normalización in July of 2021.)
    7/1/2021 - PDF - English - AENOR
    Learn More
    €42.00

  • UNE-EN IEC 61587-6:2021

    Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (Endorsed by Asociación Española de Normalización in July of 2021.)
    7/1/2021 - PDF - English - AENOR
    Learn More
    €69.00

  • BS EN IEC 61076-3-122:2021

    Connectors for electrical and electronic equipment. Product requirements Detail specification 8-way, shielded, free fixed connectors I/O data transmission with frequencies up to 500 MHz current-carrying capacity in industrial environments
    6/11/2021 - PDF - English - BSI
    Learn More
    €293.00

  • BS EN 60286-1:2017+A1:2021

    Packaging of components for automatic handling Tape packaging with axial leads on continuous tapes
    6/7/2021 - PDF - English - BSI
    Learn More
    €180.00

  • DIN EN IEC 61837-2:2021-06

    Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures (IEC 61837-2:2018 + A1:2020), German version EN IEC 61837-2:2018 + A1:2020.
    6/1/2021 - PDF - German - DIN
    Learn More
    €246.73

  • BS EN IEC 61587-6:2021

    Mechanical structures for electrical and electronic equipment. Tests IEC 60917 60297 series Security aspects indoor cabinets
    5/28/2021 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN IEC 61587-6, C93-471-6 (05/2021)

    Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6 : security aspects for indoor cabinets - Structures mécaniques pour équipements électriques et électroniques - Essais pour les séries IEC 60917 et IEC 60297 - Partie 6 : Aspects liés à la sécurité des baies intérieures.
    5/1/2021 - Paper - French - AFNOR
    Learn More
    €88.33

  • NF EN 60286-1/A1, C93-013-1/A1 (05/2021)

    Packaging of components for automatic handling - Part 1 : tape packaging of components with axial leads on continuous tapes - Amendement 1 - Emballage des composants pour opérations automatisées - Partie 1 : mise en bande des composants à sorties axiales en bandes continues.
    5/1/2021 - Paper - French - AFNOR
    Learn More
    €54.67

  • IEC 61587-6:2021

    IEC 61587-6:2021 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets
    4/12/2021 - PDF - English, French - IEC
    Learn More
    €132.00

  • IEC 60286-1:2017+AMD1:2021 Edition 3.1

    IEC 60286-1:2017+AMD1:2021 (Consolidated version) Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
    4/7/2021 - PDF - English, French - IEC
    Learn More
    €150.00

  • IEC 60286-1:2017/AMD1:2021

    IEC 60286-1:2017/AMD1:2021 Amendment 1 - Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
    4/7/2021 - PDF - English, French - IEC
    Learn More
    €23.00

  • UNE-EN IEC 61760-3:2021

    Surface mounting technology - Part 3: Standard method for the specification of components for through-hole reflow (THR) soldering (Endorsed by Asociación Española de Normalización in April of 2021.)
    4/1/2021 - PDF - English - AENOR
    Learn More
    €75.00

  • PD IEC TS 62966-3:2021

    Mechanical structures for electrical and electronic equipment. Aisle containment it cabinets Aspects of operational personal safety
    2/9/2021 - PDF - English - BSI
    Learn More
    €250.00

  • IEC TS 62966-3:2021

    IEC TS 62966-3:2021 Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 3: Aspects of operational and personal safety
    1/26/2021 - PDF - English - IEC
    Learn More
    €132.00

  • UNE-EN IEC 61760-1:2020

    Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) (Endorsed by Asociación Española de Normalización in November of 2020.)
    11/1/2020 - PDF - English - AENOR
    Learn More
    €88.00

  • UNE-EN IEC 62966-2:2020

    Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements (Endorsed by Asociación Española de Normalización in November of 2020.)
    11/1/2020 - PDF - English - AENOR
    Learn More
    €72.00

  • BS EN IEC 61760-1:2020

    Surface mounting technology Standard method for the specification of surface components (SMDs)
    10/2/2020 - PDF - English - BSI
    Learn More
    €331.00

  • BS EN IEC 62966-2:2020

    Mechanical structures for electrical and electronic equipment. Aisle containment IT cabinets Details of air flow, separation cooling requirements
    10/1/2020 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN IEC 62966-2, C93-636-2 (09/2020)

    Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2 : details of air flow, air separation and air cooling requirements
    9/1/2020 - Paper - French - AFNOR
    Learn More
    €103.33

  • UNE-EN IEC 61969-3:2020

    Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (Endorsed by Asociación Española de Normalización in September of 2020.)
    9/1/2020 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN IEC 61969-1:2020

    Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines (Endorsed by Asociación Española de Normalización in August of 2020.)
    8/1/2020 - PDF - English - AENOR
    Learn More
    €65.00

  • IEC 62966-2:2020

    IEC 62966-2:2020 Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements
    7/15/2020 - PDF - English, French - IEC
    Learn More
    €173.00

  • IEC 61760-1:2020

    IEC 61760-1:2020 Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
    7/14/2020 - PDF - English, French - IEC
    Learn More
    €311.00

  • NF EN IEC 61969-1, C93-476-1 (07/2020)

    Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1 : design guidelines
    7/1/2020 - Paper - French - AFNOR
    Learn More
    €88.33

  • NF EN IEC 61969-3, C93-476-3 (07/2020)

    Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3 : environmental requirements, tests and safety aspects - Structures mécaniques pour équipement électronique - Enveloppes de plein air - Partie 3 : Exigences environnementales, essais et aspects de la sécurité
    7/1/2020 - Paper - French - AFNOR
    Learn More
    €88.33

  • UNE-EN IEC 62610-6:2020

    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 Series - Part 6: Air recirculation and bypass of indoor cabinets (Endorsed by Asociación Española de Normalización in June of 2020.)
    6/1/2020 - PDF - English - AENOR
    Learn More
    €72.00

  • BS EN IEC 62610-6:2020

    Mechanical structures for electrical and electronic equipment. Thermal management cabinets in accordance with IEC 60297 60917 series Air recirculation bypass of indoor
    5/20/2020 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN IEC 62610-6, C93-627-6 (05/2020)

    Structures mécaniques pour équipements électriques et électroniques - Gestion thermique pour les armoires conformes aux séries IEC 60297 et IEC 60917 - Partie 6 : recyclage et dérivation de l'air des armoires intérieures
    5/1/2020 - Paper - French - AFNOR
    Learn More
    €88.33

  • IEC 62610-6:2020

    IEC 62610-6:2020 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor cabinets
    3/25/2020 - PDF - English - IEC
    Learn More
    €173.00

  • IEC 62610-6:2020

    IEC 62610-6:2020 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor cabinets
    3/25/2020 - PDF - English, French - IEC
    Learn More
    €173.00

  • BS EN IEC 61191-1:2018 + Redline

    Tracked Changes. Printed board assemblies Generic specification. Requirements for soldered electrical and electronic using surface mount related assembly technologies
    2/27/2020 - PDF - English - BSI
    Learn More
    €432.00

  • BS EN 61191-3:2017 + Redline

    Tracked Changes. Printed board assemblies Sectional specification. Requirements for through-hole mount soldered
    2/26/2020 - PDF - English - BSI
    Learn More
    €326.00

  • DIN EN IEC 62966-1:2019-12

    Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and mechanical requirements (IEC 62966-1:2019), German version EN IEC 62966-1:2019
    12/1/2019 - PDF - German - DIN
    Learn More
    €92.62

  • UNE-EN 61191-2:2017/AC:2019-10

    Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies (Endorsed by Asociación Española de Normalización in December of 2019.)
    12/1/2019 - PDF - English - AENOR
    Learn More
    €0.00

  • UNE-EN IEC 60917-1:2019

    Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard (Endorsed by Asociación Española de Normalización in December of 2019.)
    12/1/2019 - PDF - English - AENOR
    Learn More
    €74.00

  • BS EN IEC 60917-1:2019

    Modular order for the development of mechanical structures electrical and electronic equipment practices Generic standard
    11/18/2019 - PDF - English - BSI
    Learn More
    €293.00

  • NF EN IEC 60917-1, C93-441-1 (11/2019)

    Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1 : generic standard - Ordre modulaire pour le développement des structures mécaniques pour les infrastructures électroniques - Partie 1 : Norme générique
    11/1/2019 - Paper - French - AFNOR
    Learn More
    €116.50

  • PD IEC TR 60286-7:2019

    Packaging of components for automatic handling Introduction a bulk blister pack miniaturized
    10/29/2019 - PDF - English - BSI
    Learn More
    €180.00

  • IEC TR 60286-7:2019

    IEC TR 60286-7:2019 Packaging of components for automatic handling - Part 7: Introduction of a bulk blister pack for miniaturized components
    10/14/2019 - PDF - English, French - IEC
    Learn More
    €92.00

  • BS EN 61191-2:2017

    Printed board assemblies Sectional specification. Requirements for surface mount soldered
    10/7/2019 - PDF - English - BSI
    Learn More
    €293.00

  • IEC 60917-1:2019

    IEC 60917-1:2019 Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard
    9/13/2019 - PDF - English, French - IEC
    Learn More
    €219.00

  • IEC 60917-1:2019 + Redline

    IEC 60917-1:2019 (Redline version) Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard
    9/13/2019 - PDF - English - IEC
    Learn More
    €284.00

  • UNE-EN IEC 62966-1:2019

    Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and mechanical requirements (Endorsed by Asociación Española de Normalización in June of 2019.)
    6/1/2019 - PDF - English - AENOR
    Learn More
    €66.00

  • IPC 7095D-WAM1:2019

    Design and Assembly Process Implementation for BGAs, with Amendment 1
    6/1/2019 - PDF sécurisé - English - IPC
    Learn More
    €195.00

  • BS EN IEC 62966-1:2019

    Mechanical structures for electrical and electronic equipment. Aisle containment IT cabinets Dimensions mechanical requirements
    5/3/2019 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN IEC 62966-1, C93-636-1 (04/2019)

    Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1 : dimensions and mechanical requirements
    4/1/2019 - Paper - French - AFNOR
    Learn More
    €103.33

  • DIN EN IEC 62610-2:2019-04

    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling (IEC 62610-2:2018), German version EN IEC 62610-2:2018
    4/1/2019 - PDF - German - DIN
    Learn More
    €99.35

  • UNE-EN IEC 60286-3:2019

    Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in April of 2019.)
    4/1/2019 - PDF - English - AENOR
    Learn More
    €80.00

  • IEC 62966-1:2019

    IEC 62966-1:2019 Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 1: Dimensions and mechanical requirements
    3/8/2019 - PDF - English, French - IEC
    Learn More
    €132.00

  • NF EN IEC 60286-3, C93-013-3 (03/2019)

    Packaging of components for automatic handling - Part 3 : packaging of surface mount components on continuous tapes
    3/1/2019 - Paper - French - AFNOR
    Learn More
    €141.33

  • DIN EN 60191-4:2019-02

    Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages (IEC 60191-4:2013 + A1:2018), German version EN 60191-4:2014 + A1:2018.
    2/1/2019 - PDF - German - DIN
    Learn More
    €120.84

  • UNE-EN IEC 60297-3-110:2018

    Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses (Endorsed by Asociación Española de Normalización in December of 2018.)
    12/1/2018 - PDF - English - AENOR
    Learn More
    €66.00

  • UNE-EN IEC 61191-1:2018

    Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (Endorsed by Asociación Española de Normalización in December of 2018.)
    12/1/2018 - PDF - English - AENOR
    Learn More
    €84.00

  • BS EN IEC 60297-3-110:2018

    Mechanical structures for electrical and electronic equipment. Dimensions of mechanical the 482,6 mm (19 in) series Residential racks cabinets smart houses
    11/13/2018 - PDF - English - BSI
    Learn More
    €250.00

  • BS EN IEC 61191-1:2018

    Printed board assemblies Generic specification. Requirements for soldered electrical and electronic using surface mount related assembly technologies
    11/13/2018 - PDF - English - BSI
    Learn More
    €331.00

  • DIN EN IEC 60191-1:2018-10

    Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices (IEC 60191-1:2018), German version EN IEC 60191-1:2018.
    10/1/2018 - PDF - German - DIN
    Learn More
    €131.96

  • DIN EN 61969-3 VDE 0687-969-3:2018-10

    Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (IEC 48D/670/CD:2018), Text in German and English
    10/1/2018 - Paper - German - VDE
    Learn More
    €20.45

  • DIN EN 61969-1 VDE 0687-969-1:2018-10

    Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines (IEC 48D/671/CD:2018), Text in German and English
    10/1/2018 - Paper - German - VDE
    Learn More
    €18.19

  • NF EN IEC 60297-3-110, C93-464-3-110 (10/2018)

    Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) Series - Part 110 : residential racks and cabinets for smart houses - Structures mécaniques pour équipements électriques et électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) - Partie 110 : bâtis et baies domestiques pour maisons intelligentes
    10/1/2018 - Paper - French - AFNOR
    Learn More
    €88.00

  • IEC 61191-1:2018

    IEC 61191-1:2018 Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
    9/14/2018 - PDF - English, French - IEC
    Learn More
    €311.00

  • IEC 61191-1:2018 + Redline

    IEC 61191-1:2018 (Redline version) Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
    9/14/2018 - PDF - English - IEC
    Learn More
    €404.00

  • IEC 60297-3-110:2018

    IEC 60297-3-110:2018 Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses
    8/15/2018 - PDF - English, French - IEC
    Learn More
    €132.00

  • UNE-EN IEC 62610-2:2018

    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling (Endorsed by Asociación Española de Normalización in August of 2018.)
    8/1/2018 - PDF - English - AENOR
    Learn More
    €69.00

  • BS EN IEC 62610-2:2018

    Mechanical structures for electrical and electronic equipment. Thermal management cabinets in accordance with IEC 60297 60917 series Method the determination of forced air cooling structure
    7/19/2018 - PDF - English - BSI
    Learn More
    €250.00

  • IEC 62610-2:2018

    IEC 62610-2:2018 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling
    5/16/2018 - PDF - English, French - IEC
    Learn More
    €132.00

  • DIN EN 61191-4:2018-05

    Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies (IEC 61191-4:2017), German version EN 61191-4:2017.
    5/1/2018 - PDF - German - DIN
    Learn More
    €99.35

  • DIN EN 61191-3:2018-05

    Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies (IEC 61191-3:2017), German version EN 61191-3:2017.
    5/1/2018 - PDF - German - DIN
    Learn More
    €99.35

  • DIN EN 61587-1 VDE 0687-587-1:2018-03

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation (IEC 61587-1:2016), German version EN 61587-1:2017
    3/1/2018 - Paper - German - VDE
    Learn More
    €116.31

  • IPC J-STD-033D:2018

    Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices
    3/1/2018 - PDF sécurisé - Spanish - IPC
    Learn More
    €108.00

  • IPC J-STD-033D:2018

    Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices
    3/1/2018 - PDF sécurisé - Chinese - IPC
    Learn More
    €108.00

  • IPC J-STD-033D:2018

    Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices
    3/1/2018 - PDF sécurisé - English - IPC
    Learn More
    €108.00

  • IPC J-STD-033D:2018

    Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices
    3/1/2018 - Paper - English - IPC
    Learn More
    €173.00

  • IPC J-STD-033D:2018

    Handling, Packing, Shipping and Use of Moisture, Reflow, and Process Sensitive Devices
    3/1/2018 - Paper - Spanish - IPC
    Learn More
    €173.00

  • DIN EN 61587-6 VDE 0687-587-6:2018-02

    Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (IEC 61587-6:2017), German version EN 61587-6:2017
    2/1/2018 - Paper - German - VDE
    Learn More
    €61.54

  • UNE-EN 61191-4:2017

    Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies (Endorsed by Asociación Española de Normalización in December of 2017.)
    12/1/2017 - PDF - English - AENOR
    Learn More
    €64.00

  • UNE-EN 60286-1:2017

    Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (Endorsed by Asociación Española de Normalización in December of 2017.)
    12/1/2017 - PDF - English - AENOR
    Learn More
    €58.00

  • BS EN 61191-4:2017

    Printed board assemblies Sectional specification. Requirements for terminal soldered
    11/20/2017 - PDF - English - BSI
    Learn More
    €250.00

  • NF EN 60286-1, C93-013-1 (11/2017)

    Packaging of components for automatic handling - Part 1 : tape packaging of components with axial leads on continuous tapes
    11/1/2017 - Paper - French - AFNOR
    Learn More
    €88.33

  • UNE-EN 61191-2:2017

    Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies (Endorsed by Asociación Española de Normalización in November of 2017.)
    11/1/2017 - PDF - English - AENOR
    Learn More
    €76.00

  • NF EN 61191-4, C90-706 (10/2017)

    Ensembles de cartes imprimées - Partie 4 : Spécification intermédiaire - Exigences pour les assemblages soudés des terminaux
    10/1/2017 - Paper - French - AFNOR
    Learn More
    €103.33

  • UNE-EN 61191-3:2017

    Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies (Endorsed by Asociación Española de Normalización in October of 2017.)
    10/1/2017 - PDF - English - AENOR
    Learn More
    €65.00

  • BS EN 61191-3:2017

    Printed board assemblies Sectional specification. Requirements for through-hole mount soldered
    9/25/2017 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN 61587-6:2017

    Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security aspects for indoor cabinets (Endorsed by Asociación Española de Normalización in September of 2017.)
    9/1/2017 - PDF - English - AENOR
    Learn More
    €62.00

  • NF EN 61587-6, C93-471-6 (08/2017)

    Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6 : security aspects for indoor cabinets
    8/1/2017 - Paper - French - AFNOR
    Learn More
    €88.33

  • IEC 60286-1:2017

    IEC 60286-1:2017 Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
    7/26/2017 - PDF - English, French - IEC
    Learn More
    €92.00

  • IEC 60286-1:2017

    IEC 60286-1:2017 Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
    7/26/2017 - PDF - English - IEC
    Learn More
    €92.00

  • IEC 61191-4:2017

    IEC 61191-4:2017 Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies
    7/26/2017 - PDF - English - IEC
    Learn More
    €132.00

  • IEC 61191-4:2017

    IEC 61191-4:2017 Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies
    7/26/2017 - PDF - English, French - IEC
    Learn More
    €132.00

  • DIN EN 60191-6-13:2017-06

    Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA) (IEC 60191-6-13:2016), German version EN 60191-6-13:2016.
    6/1/2017 - PDF - German - DIN
    Learn More
    €92.62

  • NF EN 61587-1, C93-471-1 (06/2017)

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1 : environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation - Structures mécaniques pour équipement électronique - Essais pour les séries IEC 60917 et IEC 60297 - Partie 1 : Exigences environnementales, montage d'essai et aspects de la sécurité des baies, bâtis, bacs à cartes et châssis dans des conditions d'intérieur
    6/1/2017 - Paper - French - AFNOR
    Learn More
    €136.68

  • UNE-EN 61587-1:2017

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation (Endorsed by Asociación Española de Normalización in June of 2017.)
    6/1/2017 - PDF - English - AENOR
    Learn More
    €78.00

  • IEC 61191-3:2017

    IEC 61191-3:2017 Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies
    5/30/2017 - PDF - English, French - IEC
    Learn More
    €132.00

  • IEC 61191-3:2017

    IEC 61191-3:2017 Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies
    5/30/2017 - PDF - English - IEC
    Learn More
    €132.00

  • IEC 61191-2:2017

    IEC 61191-2:2017 Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies
    5/23/2017 - PDF - English, French - IEC
    Learn More
    €270.00

  • IEC 61191-2:2017

    IEC 61191-2:2017 Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies
    5/23/2017 - PDF - English - IEC
    Learn More
    €270.00

  • UNE-EN 62739-3:2017

    Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods (Endorsed by Asociación Española de Normalización in May of 2017.)
    5/1/2017 - PDF - English - AENOR
    Learn More
    €72.00

  • BS EN 62739-3:2017

    Test method for erosion of wave soldering equipment using molten lead-free solder alloy Selection guidance test methods
    4/30/2017 - PDF - English - BSI
    Learn More
    €293.00

  • NF EN 62739-3, C93-742-3 (03/2017)

    Méthode d'essai de l'érosion de l'équipement de brasage à la vague utilisant un alliage à braser sans plomb fondu - Partie 3 : document d'orientation pour le choix des méthodes d'essai d'érosion
    3/1/2017 - Paper - French - AFNOR
    Learn More
    €116.33

  • DIN EN 62610-5:2017-02

    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets (IEC 62610-5:2016), German version EN 62610-5:2016
    2/1/2017 - PDF - German - DIN
    Learn More
    €92.62

  • IEC 62739-3:2017

    IEC 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods
    1/6/2017 - PDF - English - IEC
    Learn More
    €270.00

  • IEC 62739-3:2017

    IEC 62739-3:2017 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of erosion test methods
    1/6/2017 - PDF - English, French - IEC
    Learn More
    €270.00

  • JIS B 7545/ERRATUM 1:2016

    ERRATUM
    12/8/2016 - PDF - Japanese - JSA
    Learn More
    €0.00

  • JIS C 6011-1/ERRATUM 1:2016

    ERRATUM
    12/8/2016 - PDF - Japanese - JSA
    Learn More
    €0.00

  • UNE-EN 62739-2:2016

    Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing (Endorsed by AENOR in November of 2016.)
    11/1/2016 - PDF - English - AENOR
    Learn More
    €63.00

  • BS EN 62739-2:2016

    Test method for erosion of wave soldering equipment using molten lead-free solder alloy Erosion test metal materials with surface processing
    10/31/2016 - PDF - English - BSI
    Learn More
    €180.00

  • DIN EN 60297-3-109 VDE 0687-297-3-109:2016-09

    Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices (IEC 60297-3-109:2015), German version EN 60297-3-109:2016
    9/1/2016 - Paper - German - VDE
    Learn More
    €69.60

  • UNE-EN 62610-5:2016

    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets (Endorsed by AENOR in August of 2016.)
    8/1/2016 - PDF - English - AENOR
    Learn More
    €65.00

  • IEC 62739-2:2016

    IEC 62739-2:2016 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for metal materials with surface processing
    7/13/2016 - PDF - English, French - IEC
    Learn More
    €92.00

  • BS EN 62610-5:2016

    Mechanical structures for electrical and electronic equipment. Thermal management cabinets in accordance with IEC 60297 60917 series Cooling performance evaluation indoor
    6/30/2016 - PDF - English - BSI
    Learn More
    €250.00

  • IEC 62610-5:2016

    IEC 62610-5:2016 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets
    4/20/2016 - PDF - English, French - IEC
    Learn More
    €132.00

  • DIN EN 61837-3:2016-04

    Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures (IEC 61837-3:2015), German version EN 61837-3:2015.
    4/1/2016 - PDF - German - DIN
    Learn More
    €99.35

  • BS EN 60297-3-109:2016

    Mechanical structures for electrical and electronic equipment. Dimensions of mechanical the 482,6 mm (19 in) series chassis embedded computing devices
    3/31/2016 - PDF - English - BSI
    Learn More
    €250.00

  • UNE-EN 60297-3-109:2016

    Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices (Endorsed by AENOR in March of 2016.)
    3/1/2016 - PDF - English - AENOR
    Learn More
    €66.00

  • DIN EN 61837-4:2016-02

    Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 4: Hybrid enclosure outlines (IEC 61837-4:2015), German version EN 61837-4:2015.
    2/1/2016 - PDF - German - DIN
    Learn More
    €85.79

  • IEC 60297-3-109:2015

    IEC 60297-3-109:2015 Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices
    11/23/2015 - PDF - English, French - IEC
    Learn More
    €173.00

  • JIS C 6011-1:2015

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
    11/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 6011-2:2015

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks
    11/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 6011-3:2015

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks
    11/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • JIS C 6012-3-100:2015

    Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets
    11/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • TS C 62610-2:2015

    Mechanical structures for electronic equipment - Thermal management for cabinets with IEC 60297 (all parts) and JIS C 6010 (all parts) - Design guide: Method for the determination of forced air-cooling structure
    11/20/2015 - PDF - Japanese - JSA
    Learn More
    €25.00

  • UNE-EN 60286-2:2015

    Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes (Endorsed by AENOR in July of 2015.)
    7/1/2015 - PDF - English - AENOR
    Learn More
    €76.00

  • DIN EN 60297-3-108 VDE 0687-297-3-108:2015-06

    Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units (IEC 60297-3-108:2014), German version EN 60297-3-108:2015
    6/1/2015 - Paper - German - VDE
    Learn More
    €77.84

  • NF EN 60297-3-108, C93-464-3-108 (04/2015)

    Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108 : dimensions of R-type subracks and plug-in units - Structures mécaniques pour équipements électroniques
    4/1/2015 - Paper - French - AFNOR
    Learn More
    €116.50

  • UNE-EN 60297-3-108:2015

    Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units (Endorsed by AENOR in February of 2015.)
    2/1/2015 - PDF - English - AENOR
    Learn More
    €70.00

  • BS EN 60297-3-108:2015

    Mechanical structures for electronic equipment. Dimensions of mechanical the 482,6 mm (19 in) series R-type subracks and plug-in units
    1/31/2015 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN 61587-5 VDE 0687-587-5:2014-12

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units (IEC 61587-5:2013), German version EN 61587-5:2014
    12/1/2014 - Paper - German - VDE
    Learn More
    €77.84

  • IEC 60297-3-108:2014

    IEC 60297-3-108:2014 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units
    9/9/2014 - PDF - English, French - IEC
    Learn More
    €219.00

  • UNE-EN 61587-5:2014

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units (Endorsed by AENOR in May of 2014.)
    5/1/2014 - PDF - English - AENOR
    Learn More
    €69.00

  • BS EN 61587-5:2014

    Mechanical structures for electronic equipment. Tests IEC 60917 and 60297 Seismic tests chassis, subracks plug-in units
    4/30/2014 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN 62610-4:2014-04

    Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets (IEC 62610-4:2013), German version EN 62610-4:2013
    4/1/2014 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 60679-3:2014-01

    Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections (IEC 60679-3:2012), German version EN 60679-3:2013.
    1/1/2014 - PDF - German - DIN
    Learn More
    €104.95

  • UNE-EN 62610-4:2013

    Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets (Endorsed by AENOR in January of 2014.)
    1/1/2014 - PDF - English - AENOR
    Learn More
    €65.00

  • UNE-EN 60286-4:2013

    Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms (Endorsed by AENOR in January of 2014.)
    1/1/2014 - PDF - English - AENOR
    Learn More
    €63.00

  • IEC 61587-5:2013

    IEC 61587-5:2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units
    12/10/2013 - PDF - English, French - IEC
    Learn More
    €173.00

  • BS EN 60286-4:2013

    Packaging of components for automatic handling Stick magazines electronic encapsulated in packages different forms
    11/30/2013 - PDF - English - BSI
    Learn More
    €180.00

  • BS EN 62610-4:2013

    Mechanical structures for electronic equipment. Thermal management cabinets in accordance with IEC 60297 and 60917 series Cooling performance tests water supplied heat exchangers
    11/30/2013 - PDF - English - BSI
    Learn More
    €250.00

  • DIN EN 61587-3 VDE 0687-587-3:2013-11

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks (IEC 61587-3:2013), German version EN 61587-3:2013
    11/1/2013 - Paper - German - VDE
    Learn More
    €53.63

  • UNE-EN 62739-1:2013

    Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing (Endorsed by AENOR in October of 2013.)
    10/1/2013 - PDF - English - AENOR
    Learn More
    €65.00

  • BS EN 62739-1:2013

    Test method for erosion of wave soldering equipment using molten lead-free solder alloy Erosion test metal materials without surface processing
    9/30/2013 - PDF - English - BSI
    Learn More
    €180.00

  • IEC 62610-4:2013

    IEC 62610-4:2013 Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets
    8/15/2013 - PDF - English, French - IEC
    Learn More
    €132.00

  • DIN EN 60191-6-22:2013-08

    Mechanical standardization of semiconductor devices - Part 6-22: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball Grid Array and Silicon Fine-pitch Land Grid Array (S-FBGA and S-FLGA) (IEC 60191-6-22:2012), German version EN 60191-6-22:2013
    8/1/2013 - PDF - German - DIN
    Learn More
    €92.62

  • IEC 60286-4:2013

    IEC 60286-4:2013 Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms
    7/26/2013 - PDF - English, French - IEC
    Learn More
    €92.00

  • IEC 62739-1:2013

    IEC 62739-1:2013 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for metal materials without surface processing
    6/18/2013 - PDF - English, French - IEC
    Learn More
    €132.00

  • UNE-EN 61587-3:2013

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks (Endorsed by AENOR in June of 2013.)
    6/1/2013 - PDF - English - AENOR
    Learn More
    €62.00

  • BS EN 61587-3:2013

    Mechanical structures for electronic equipment. Tests IEC 60917 and 60297 Electromagnetic shielding performance tests cabinets subracks
    5/31/2013 - PDF - English - BSI
    Learn More
    €180.00

  • DIN EN 60917-2-5:2013-04

    Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions for miscellaneous equipment (IEC 60917-2-5:2012), German version EN 60917-2-5:2012
    4/1/2013 - PDF - German - DIN
    Learn More
    €92.62

  • DIN EN 61587-4 VDE 0687-587-4:2013-04

    Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets (IEC 61587-4:2012), German version EN 61587-4:2012
    4/1/2013 - Paper - German - VDE
    Learn More
    €49.48

  • IEC 61587-3:2013

    IEC 61587-3:2013 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks
    2/6/2013 - PDF - English, French - IEC
    Learn More
    €92.00

Items 1 to 200 of 338 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2