17.040 : Linear and angular measurements

Items 1 to 200 of 2189 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  • DIN EN ISO 3882:2024-04

    Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2024), German version EN ISO 3882:2024
    4/1/2024 - PDF - German -
    Learn More
    €79.72

  • ASTM F2791-24

    Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
    3/15/2024 - PDF - English -
    Learn More
    €60.00

  • ASTM F2791-24 + Redline

    Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
    3/15/2024 - PDF - English -
    Learn More
    €71.00

  • PR NF ISO 1206/A1, E22-370/A1PR (03/2024)

    Roulements - Roulements à aiguilles avec bagues usinées - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance - Amendement 1
    3/1/2024 - Paper - English, French -
    Learn More
    €45.00

  • BS EN ISO 18183-2:2024

    Geometrical product specifications (GPS). Partition Nominal model
    2/16/2024 - PDF - English -
    Learn More
    €180.00

  • BS EN ISO 18183-3:2024

    Geometrical product specifications (GPS). Partition Methods used for specification and verification
    2/16/2024 - PDF - English -
    Learn More
    €250.00

  • NBN EN ISO 18183-2:2024

    Spécification géométrique des produits (GPS) - Partition - Partie 2: Modèle nominal (ISO 18183-2:2024)
    2/14/2024 - PDF - French -
    Learn More
    €89.00

  • NBN EN ISO 18183-3:2024

    Spécification géométrique des produits (GPS) - Partition - Partie 3: Méthodes utilisées pour la spécification et la vérification (ISO 18183-3:2024)
    2/14/2024 - PDF - French -
    Learn More
    €142.00

  • NBN EN ISO 18183-2:2024

    Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO 18183-2:2024)
    2/14/2024 - PDF - English -
    Learn More
    €89.00

  • NBN EN ISO 18183-3:2024

    Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024)
    2/14/2024 - PDF - English -
    Learn More
    €142.00

  • DIN/TR 23605:2024-02

    Technical product specification (TPS) - Application guidance - Structured and commented overview of ISO and DIN Standards for technical product documentation (TPD) and geometrical product specification (GPS)
    2/1/2024 - PDF - German -
    Learn More
    €113.64

  • NF EN ISO 18183-3, E04-578-3 (02/2024)

    Spécification géométrique des produits (GPS) - Partition - Partie 3 : méthodes utilisées pour la spécification et la vérification
    2/1/2024 - Paper - French -
    Learn More
    €86.67

  • PR NF EN ISO 9013/A1, A87-000/A1PR (02/2024)

    Coupage thermique - Classification des coupes thermiques - Spécification géométrique des produits et tolérances relatives à la qualité - Amendement 1
    2/1/2024 - Paper - English, French -
    Learn More
    €45.00

  • PR NF EN ISO 5059-1, E11-098-1PR (02/2024)

    Spécification géométrique des produits (GPS) - Equipements de mesurage dimensionnel : micromètres d'intérieur - Partie 1 : Micromètres d'intérieur à deux touches - Caractéristiques de conception et caractéristiques métrologiques
    2/1/2024 - Paper - English, French -
    Learn More
    €80.50

  • DIN EN ISO 5059-1:2024-02

    Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers - Part 1: Two-point inside micrometers - Design and metrological characteristics (ISO/DIS 5059-1:2024), German and English version prEN ISO 5059-1:2024
    2/1/2024 - PDF - English, German -
    Learn More
    €79.72

  • NF EN ISO 18183-2, E04-578-2 (02/2024)

    Spécification géométrique des produits (GPS) - Partition - Partie 2 : modèle nominal
    2/1/2024 - Paper - French -
    Learn More
    €48.00

  • BS EN ISO 4351:2023

    Geometrical product specifications (GPS). Association
    1/5/2024 - PDF - English -
    Learn More
    €250.00

  • 24/30448290 DC:2024

    BS ISO 5059-1 Geometrical product specifications (GPS) - Dimensional measuring equipment: inside micrometers Part 1: Two-point micrometers. Design and metrological characteristics
    1/2/2024 - PDF - English -
    Learn More
    €24.00

  • DIN EN ISO 9013/A1:2024-01

    Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/DAM 1:2023), German and English version EN ISO 9013:2017/prA1:2023
    1/1/2024 - PDF - English, German -
    Learn More
    €32.34

  • PR NF E22-621, E22-621PR (01/2024)

    Transmissions mécaniques - Assemblages frettés sur portée cylindrique - Fonction, réalisation, calcul
    1/1/2024 - Paper - French -
    Learn More
    €88.50

  • NBN EN ISO 4351:2023

    Spécification géométrique des produits (GPS) - Association (ISO 4351:2023)
    12/21/2023 - PDF - French -
    Learn More
    €58.00

  • NBN EN ISO 4351:2023

    Geometrical product specifications (GPS) - Association (ISO 4351:2023)
    12/21/2023 - PDF - English -
    Learn More
    €58.00

  • UNE-EN ISO 8062-3:2023

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023)
    12/20/2023 - PDF - Spanish -
    Learn More
    €89.00

  • UNE-EN 13523-14:2023

    Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
    12/20/2023 - PDF - Spanish -
    Learn More
    €53.00

  • UNE-EN ISO 8062-3:2023

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023)
    12/20/2023 - PDF - English -
    Learn More
    €106.80

  • UNE-EN 13523-14:2023

    Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
    12/20/2023 - PDF - English -
    Learn More
    €63.60

  • DIN EN ISO 16610-31:2023-12

    Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO/DIS 16610-31:2023), German and English version prEN ISO 16610-31:2023
    12/1/2023 - PDF - English, German -
    Learn More
    €92.62

  • PR NF EN ISO 16610-31, E05-040-31PR (12/2023)

    Spécification géométrique des produits (GPS) - Filtrage - Partie 31 : filtres de profil robustes: Filtres de régression gaussiens
    12/1/2023 - Paper - English, French -
    Learn More
    €88.50

  • DIN EN ISO 25178-603:2023-12

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments (ISO/DIS 25178-603:2023), German and English version prEN ISO 25178-603:2023
    12/1/2023 - PDF - English, German -
    Learn More
    €99.35

  • NF EN ISO 4351, E04-575 (12/2023)

    Spécification géométrique des produits (GPS) - Association
    12/1/2023 - Paper - French -
    Learn More
    €75.67

  • DIN EN ISO 16610-21:2023-12

    Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO/DIS 16610-21:2023), German and English version prEN ISO 16610-21:2023
    12/1/2023 - PDF - English, German -
    Learn More
    €104.95

  • DIN EN ISO 25178-605:2023-12

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Design and characteristics of non-contact (point autofocus probe) instruments (ISO/DIS 25178-605:2023), German and English version prEN ISO 25178-605:2023
    12/1/2023 - PDF - English, German -
    Learn More
    €92.62

  • PR NF EN ISO 16610-21, E05-040-21PR (12/2023)

    Spécification géométrique des produits (GPS) - Filtrage - Partie 21 : filtres de profil linéaires: Filtres gaussiens
    12/1/2023 - Paper - English, French -
    Learn More
    €107.50

  • PD ISO/TR 16610-32:2023 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Filtration Robust profile filters: Spline filters
    11/3/2023 - PDF - English -
    Learn More
    €326.00

  • DIN EN ISO 25178-602:2023-11

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO/DIS 25178-602:2023), German and English version prEN ISO 25178-602:2023
    11/1/2023 - PDF - English, German -
    Learn More
    €99.35

  • DIN EN ISO 10360-13:2023-11

    Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021), German version EN ISO 10360-13:2021
    11/1/2023 - PDF - German -
    Learn More
    €152.71

  • PD ISO/TR 16610-32:2023

    Geometrical product specifications (GPS). Filtration Robust profile filters: Spline filters
    11/1/2023 - PDF - English -
    Learn More
    €250.00

  • ASTM G99-23 + Redline

    Standard Test Method for Wear and Friction Testing with a Pin-on-Disk or Ball-on-Disk Apparatus
    11/1/2023 - PDF - English -
    Learn More
    €71.00

  • PR NF EN ISO 25178-604, E05-031-604PR (11/2023)

    Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 604 : Conception et caractéristiques des instruments sans contact (à interférométrie par balayage à cohérence)
    11/1/2023 - Paper - English, French -
    Learn More
    €107.50

  • PR NF EN ISO 25178-601, E05-031-601PR (11/2023)

    Spécification géométrique des produits (GPS) - État de surface : Surfacique - Partie 601 : Conception et caractéristiques des instruments à contact (à stylet)
    11/1/2023 - Paper - English, French -
    Learn More
    €88.50

  • DIN EN ISO 25178-604:2023-11

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments (ISO/DIS 25178-604:2023), German and English version prEN ISO 25178-604:2023
    11/1/2023 - PDF - English, German -
    Learn More
    €99.35

  • ASTM G98-23

    Standard Test Method for Galling Resistance of Materials
    11/1/2023 - PDF - English -
    Learn More
    €52.00

  • FD ISO/TR 16610-32, E05-040-32 (11/2023)

    Spécification géométrique des produits (GPS) - Filtrage - Partie 32 : filtres de profil robustes : filtres splines
    11/1/2023 - Paper - French -
    Learn More
    €75.67

  • DIN EN ISO 25178-601:2023-11

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO/DIS 25178-601:2023), German and English version prEN ISO 25178-601:2023
    11/1/2023 - PDF - English, German -
    Learn More
    €85.79

  • DIN EN ISO 10360-10:2023-11

    Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021), German version EN ISO 10360-10:2021
    11/1/2023 - PDF - German -
    Learn More
    €136.82

  • BS EN 60061-3:1993+A59:2023

    Lamp caps and holders together with gauges for the control of interchangeability safety Gauges
    11/1/2023 - PDF - English -
    Learn More
    €449.00

  • ASTM G99-23

    Standard Test Method for Wear and Friction Testing with a Pin-on-Disk or Ball-on-Disk Apparatus
    11/1/2023 - PDF - English -
    Learn More
    €60.00

  • ASTM G98-23 + Redline

    Standard Test Method for Galling Resistance of Materials
    11/1/2023 - PDF - English -
    Learn More
    €63.00

  • PR NF EN ISO 25178-602, E05-031-602PR (11/2023)

    Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 602 : Conception et caractéristiques des instruments sans contact (à capteur confocal chromatique)
    11/1/2023 - Paper - English, French -
    Learn More
    €88.50

  • 23/30464464 DC:2023

    BS ISO 16610-21. Geometrical product specifications (GPS). Filtration Part 21. Linear profile filters: Gaussian filters
    10/31/2023 - PDF - English -
    Learn More
    €24.00

  • 23/30463884 DC:2023

    BS EN ISO 16610-31. Geometrical product specifications (GPS). Filtration Part 31. Robust profile filters. Gaussian regression filters
    10/30/2023 - PDF - English -
    Learn More
    €24.00

  • 23/30463665 DC:2023

    BS EN ISO 25178-605. Geometrical product specifications (GPS). Surface texture. Areal Part 605. Design and characteristics of non-contact (point autofocus probe) instruments
    10/23/2023 - PDF - English -
    Learn More
    €24.00

  • 23/30463657 DC:2023

    BS EN ISO 25178-603. Geometrical product specifications (GPS). Surface texture. Areal Part 603. Design and characteristics of non-contact (phase shifting interferometry) instruments
    10/23/2023 - PDF - English -
    Learn More
    €24.00

  • 23/30463649 DC:2023

    BS EN ISO 25178-601 Geometrical product specifications (GPS). Surface texture: Areal Part 601. Design and characteristics of contact (stylus) instruments
    10/5/2023 - PDF - English -
    Learn More
    €24.00

  • 23/30463661 DC:2023

    BS EN ISO 25178-604 Geometrical product specifications (GPS). Surface texture: Areal Part 604. Design and characteristics of non-contact (coherence scanning interferometry) instruments
    10/5/2023 - PDF - English -
    Learn More
    €24.00

  • 23/30463653 DC:2023

    BS EN ISO 25178-602. Geometrical product specifications (GPS). Surface texture. Areal Part 602. Design and characteristics of non-contact (confocal chromatic probe) instruments
    10/5/2023 - PDF - English -
    Learn More
    €24.00

  • ASTM E1845-23 + Redline

    Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
    10/1/2023 - PDF - English -
    Learn More
    €71.00

  • ASTM E1845-23

    Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
    10/1/2023 - PDF - English -
    Learn More
    €60.00

  • DIN EN ISO 25178-700:2023-10

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022), German version EN ISO 25178-700:2023
    10/1/2023 - PDF - German -
    Learn More
    €104.95

  • NBN ISO 8062-4:2023

    Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: Rules and general tolerances for castings using profile tolerancing in a general datum system ISO 8062-4:2023
    9/22/2023 - PDF - English -
    Learn More
    €163.00

  • BS ISO 199:2023 + Redline

    Tracked Changes. Rolling bearings. Thrust bearings. Geometrical product specifications (GPS) and tolerance values
    9/11/2023 - PDF - English -
    Learn More
    €235.00

  • BS ISO 492:2023 + Redline

    Tracked Changes. Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
    9/7/2023 - PDF - English -
    Learn More
    €454.00

  • PR NF EN ISO 5463, E11-108PR (09/2023)

    Spécification géométrique des produits (GPS) - Équipements de mesure de forme , Instruments de mesure de forme à plateau tournant - Caractéristiques de conception et caractéristiques métrologiques
    9/1/2023 - Paper - English, French -
    Learn More
    €138.50

  • NF ISO 492, E22-335 (09/2023)

    Rolling bearings - Radial bearings - Geometrical product specifications (GPS) and tolerance values
    9/1/2023 - Paper - French -
    Learn More
    €130.67

  • DIN EN ISO 3611:2023-09

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023), German and English version EN ISO 3611:2023
    9/1/2023 - PDF - English, German -
    Learn More
    €85.79

  • DIN EN ISO 25178-2:2023-09

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021), German version EN ISO 25178-2:2022
    9/1/2023 - PDF - German -
    Learn More
    €169.25

  • NF ISO 199, E22-321 (09/2023)

    Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values
    9/1/2023 - Paper - French -
    Learn More
    €75.67

  • DIN EN ISO 5463:2023-09

    Geometrical product specifications (GPS) - Form measuring equipment, Rotary axis form measuring instruments - Design and metrological characteristics (ISO/DIS 5463:2023), German and English version prEN ISO 5463:2023
    9/1/2023 - PDF - English, German -
    Learn More
    €141.96

  • BS ISO 199:2023

    Rolling bearings. Thrust bearings. Geometrical product specifications (GPS) and tolerance values
    8/31/2023 - PDF - English -
    Learn More
    €180.00

  • BS ISO 492:2023

    Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
    8/23/2023 - PDF - English -
    Learn More
    €348.00

  • NF E11-096 (08/2023)

    Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des jauges de profondeur à coulisseau
    8/1/2023 - Paper - French -
    Learn More
    €75.67

  • DIN EN ISO 16610-62:2023-08

    Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023), German version EN ISO 16610-62:2023
    8/1/2023 - PDF - German -
    Learn More
    €79.72

  • NF E11-091 (08/2023)

    Spécification géométrique des produits (GPS) - Instruments de mesurage dimensionnel - Etalonnage des caractéristiques métrologiques pour la réception et la vérification des pieds à coulisse
    8/1/2023 - Paper - French -
    Learn More
    €75.67

  • DIN EN 13523-1:2023-08

    Coil coated metals - Test methods - Part 1: Film thickness, German and English version prEN 13523-1:2023
    8/1/2023 - PDF - English, German -
    Learn More
    €59.63

  • 23/30438188 DC:2023

    BS EN ISO 5463. Geometrical product specifications (GPS). Form measuring equipment, Rotary axis form measuring instruments. Design and metrological characteristics
    8/1/2023 - PDF - English -
    Learn More
    €24.00

  • 23/30477708 DC:2023

    BS EN 13523-1. Coil coated metals. Test methods Part 1. Film thickness
    7/27/2023 - PDF - English -
    Learn More
    €24.00

  • UNE 82210:2023

    Field procedures for the assessment of the centring uncertainty of geodetic and surveying instruments.
    7/5/2023 - PDF - Spanish -
    Learn More
    €71.00

  • BS ISO 8062-4:2023 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules general castings using profile tolerancing in a datum system
    6/22/2023 - PDF - English -
    Learn More
    €454.00

  • BS ISO 8062-4:2023

    Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules general castings using profile tolerancing in a datum system
    6/20/2023 - PDF - English -
    Learn More
    €348.00

  • SAE AMS 2224H:2023-06-13

    Tolerances Copper and Copper Alloy Wire
    6/13/2023 - PDF - English -
    Learn More
    €54.00

  • UNE-EN ISO 21920-1:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
    6/7/2023 - PDF - Spanish -
    Learn More
    €106.00

  • UNE-EN ISO 25178-2:2023

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
    6/7/2023 - PDF - English -
    Learn More
    €151.20

  • UNE-EN ISO 21920-3:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
    6/7/2023 - PDF - English -
    Learn More
    €98.40

  • UNE-EN ISO 21920-2:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
    6/7/2023 - PDF - English -
    Learn More
    €153.60

  • UNE-EN ISO 21920-1:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
    6/7/2023 - PDF - English -
    Learn More
    €127.20

  • BS EN ISO 3611:2023 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
    6/7/2023 - PDF - English -
    Learn More
    €326.00

  • UNE-EN ISO 25178-2:2023

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021)
    6/7/2023 - PDF - Spanish -
    Learn More
    €126.00

  • UNE-EN ISO 21920-3:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
    6/7/2023 - PDF - Spanish -
    Learn More
    €82.00

  • UNE-EN ISO 21920-2:2023

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06)
    6/7/2023 - PDF - Spanish -
    Learn More
    €128.00

  • BS EN ISO 3611:2023

    Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of micrometers for external measurements
    6/2/2023 - PDF - English -
    Learn More
    €250.00

  • ASTM E430-23

    Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
    6/1/2023 - PDF - English -
    Learn More
    €54.00

  • ASTM E430-23 + Redline

    Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
    6/1/2023 - PDF - English -
    Learn More
    €65.00

  • NBN EN ISO 3611:2023

    Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur (ISO 3611:2023)
    6/1/2023 - PDF - French -
    Learn More
    €89.00

  • NBN EN ISO 3611:2023

    Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023)
    6/1/2023 - PDF - English -
    Learn More
    €89.00

  • SAE AMS 2222L:2023-05-10

    Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
    5/10/2023 - PDF - English -
    Learn More
    €75.00

  • NF EN ISO 3611, E11-092 (05/2023)

    Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
    5/1/2023 - Paper - French -
    Learn More
    €75.67

  • DIN EN ISO 8062-3:2023-05

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023), German version EN ISO 8062-3:2023
    5/1/2023 - PDF - German -
    Learn More
    €115.33

  • UNE-EN ISO 16610-62:2023

    Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023) (Endorsed by Asociación Española de Normalización in April of 2023.)
    4/21/2023 - PDF - English -
    Learn More
    €59.00

  • DIN EN ISO 12179:2023-04

    Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021), German version EN ISO 12179:2022
    4/1/2023 - PDF - German -
    Learn More
    €92.62

  • DIN 2769:2023-04

    Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
    4/1/2023 - PDF - German -
    Learn More
    €52.90

  • BS EN 13523-14:2023 + Redline

    Tracked Changes. Coil coated metals. Test methods Chalking (Helmen method)
    3/27/2023 - PDF - English -
    Learn More
    €197.00

  • BS EN ISO 14571:2022

    Metallic coatings on non-metallic basis materials. Measurement of coating thickness. Micro-resistivity method
    3/20/2023 - PDF - English -
    Learn More
    €180.00

  • BS EN 13523-14:2023

    Coil coated metals. Test methods Chalking (Helmen method)
    3/20/2023 - PDF - English -
    Learn More
    €151.00

  • BS EN ISO 16610-62:2023

    Geometrical product specifications (GPS). Filtration Linear areal filters: Spline filters
    3/13/2023 - PDF - English -
    Learn More
    €180.00

  • BS IEC 61108-6:2023

    Maritime navigation and radiocommunication equipment systems. Global satellite systems (GNSS) Navigation with Indian constellation (NavIC)/Indian regional system (IRNSS). Receiver equipment. Performance requirements, methods of testing required test results
    3/10/2023 - PDF - English -
    Learn More
    €293.00

  • NBN EN ISO 16610-62:2023

    Geometrische Produktspezifikation (GPS) - Filterung - Teil 62: Lineare Flächenfilter: Spline-Filter (ISO 16610-62:2023)
    3/7/2023 - PDF - German -
    Learn More
    €58.00

  • NBN EN ISO 16610-62:2023

    Spécification géométrique des produits (GPS) - Filtrage - Partie 62: Filtres surfaciques linéaires : Filtres spline (ISO 16610-62:2023)
    3/7/2023 - PDF - French -
    Learn More
    €58.00

  • NBN EN ISO 16610-62:2023

    Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023)
    3/7/2023 - PDF - English -
    Learn More
    €58.00

  • BS EN ISO 8062-3:2023 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional machining allowances castings using ± indicated dimensions
    3/6/2023 - PDF - English -
    Learn More
    €382.00

  • NBN EN ISO 8062-3:2023

    Geometrische Produktspezifikationen (GPS) - Maß-, Form- und Lagetoleranzen für Formteile - Teil 3: Allgemeine Maß-, Form- und Lagetoleranzen und Bearbeitungszugaben für Gussstücke mit ± Toleranzen für die angegebenen Maße (ISO 8062-3:2023)
    3/2/2023 - PDF - German -
    Learn More
    €142.00

  • NBN EN ISO 8062-3:2023

    Spécification géométrique des produits (GPS) - Tolérances dimensionnelles et géométriques des pièces moulées - Partie 3: Tolérances dimensionnelles et géométriques générales et surépaisseurs d'usinage pour les pièces moulées utilisant des tolérances ± pour les dimensions indiquées (ISO 8062-3:2023)
    3/2/2023 - PDF - French -
    Learn More
    €142.00

  • NBN EN ISO 8062-3:2023

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023)
    3/2/2023 - PDF - English -
    Learn More
    €142.00

  • NF ISO 3245, E22-372 (03/2023)

    Roulements - Douilles à aiguilles sans bague intérieure - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
    3/1/2023 - Paper - French -
    Learn More
    €75.67

  • NF EN ISO 8062-3, A00-510-3 (03/2023)

    Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : General dimensional and geometrical tolerances and machining allowances for castings
    3/1/2023 - Paper - French -
    Learn More
    €99.33

  • NF ISO 1206, E22-370 (03/2023)

    Roulements - Roulements à aiguilles avec bagues usinées - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
    3/1/2023 - Paper - French -
    Learn More
    €86.67

  • PR NF EN ISO 16610-45, E05-040-45PR (03/2023)

    Spécification géométrique des produits (GPS) - Filtrage - Partie 45 : Filtres de profil morphologiques : Segmentation
    3/1/2023 - Paper - English, French -
    Learn More
    €107.50

  • NF EN ISO 16610-62, E05-040-62 (03/2023)

    Spécification géométrique des produits (GPS ) - Filtrage - Partie 62 : filtres surfaciques linéaires : filtres spline
    3/1/2023 - Paper - French -
    Learn More
    €60.67

  • BS EN ISO 8062-3:2023

    Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional machining allowances castings using ± indicated dimensions
    3/1/2023 - PDF - English -
    Learn More
    €293.00

  • BS EN ISO 21920-2:2022

    Geometrical product specifications (GPS). Surface texture: Profile Terms, definitions and surface texture parameters
    2/20/2023 - PDF - English -
    Learn More
    €377.00

  • SAE J 882:2023-02-20

    Test Method for Measuring Thickness of Automotive Textiles and Plastics
    2/20/2023 - PDF - English -
    Learn More
    €39.00

  • BS ISO 3245:2023 + Redline

    Tracked Changes. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
    2/17/2023 - PDF - English -
    Learn More
    €326.00

  • BS ISO 3245:2023

    Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
    2/14/2023 - PDF - English -
    Learn More
    €250.00

  • UNE-EN ISO 10360-10:2023

    Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
    2/8/2023 - PDF - English -
    Learn More
    €120.00

  • UNE-EN ISO 22081:2023

    Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
    2/8/2023 - PDF - English -
    Learn More
    €81.60

  • UNE-EN ISO 2692:2023

    Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
    2/8/2023 - PDF - Spanish -
    Learn More
    €107.00

  • UNE-EN ISO 12179:2023

    Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
    2/8/2023 - PDF - Spanish -
    Learn More
    €74.00

  • UNE-EN ISO 2692:2023

    Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021)
    2/8/2023 - PDF - English -
    Learn More
    €128.40

  • UNE-EN ISO 10360-10:2023

    Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021)
    2/8/2023 - PDF - Spanish -
    Learn More
    €100.00

  • UNE-EN ISO 22081:2023

    Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
    2/8/2023 - PDF - Spanish -
    Learn More
    €68.00

  • UNE-EN ISO 12179:2023

    Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
    2/8/2023 - PDF - English -
    Learn More
    €88.80

  • SAE J 448:2023-02-06

    Surface Texture
    2/6/2023 - PDF - English -
    Learn More
    €79.00

  • DIN EN ISO 16610-45:2023-02

    Geometrical product specifications (GPS) - Filtration - Part 45: Morphological profile filters: Segmentation (ISO/DIS 16610-45:2023), German and English version prEN ISO 16610-45:2023
    2/1/2023 - PDF - English, German -
    Learn More
    €110.00

  • DIN EN 16165:2023-02

    Determination of slip resistance of pedestrian surfaces - Methods of evaluation, German version EN 16165:2021
    2/1/2023 - PDF - German -
    Learn More
    €136.82

  • BS EN ISO 25178-700:2023

    Geometrical product specifications (GPS). Surface texture: Areal Calibration, adjustment and verification of areal topography measuring instruments
    1/25/2023 - PDF - English -
    Learn More
    €293.00

  • SAE AMS 2221H:2023-01-17

    Tolerances Copper and Copper Alloy Bars and Rods
    1/17/2023 - PDF - English -
    Learn More
    €60.00

  • 23/30406192 DC:2023

    BS EN ISO 16610-45. Geometrical product specifications (GPS). Filtration Part 45. Morphological profile filters. Segmentation
    1/13/2023 - PDF - English -
    Learn More
    €24.00

  • NBN EN ISO 25178-700:2023

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022)
    1/12/2023 - PDF - English -
    Learn More
    €121.00

  • NBN EN ISO 25178-700:2023

    Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 700: Étalonnage, ajustage et vérification d'instruments de mesure de la topographie des surfaces (ISO 25178-700:2022)
    1/12/2023 - PDF - French -
    Learn More
    €121.00

  • NBN EN ISO 25178-700:2023

    Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Fläche - Teil 700: Kalibrierung, Justierung und Verifizierung von flächenhaften Topographiemessgeräten (ISO 25178-700:2022)
    1/12/2023 - PDF - German -
    Learn More
    €121.00

  • BS EN ISO 2692:2021 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
    1/4/2023 - PDF - English -
    Learn More
    €454.00

  • NF EN ISO 25178-700, E05-031-700 (01/2023)

    Geometrical product specifications (GPS) - Surface texture : Areal - Part 700 : Calibration, adjustment and verification of areal topography measuring instruments
    1/1/2023 - Paper - French -
    Learn More
    €99.33

  • DIN EN ISO 14571:2023-01

    Metallic coatings on non-metallic basis materials - Measurement of coating thickness - Micro-resistivity method (ISO 14571:2020), German version EN ISO 14571:2022
    1/1/2023 - PDF - German -
    Learn More
    €65.89

  • 22/30427351 DC:2022

    BS EN ISO 3882. Metallic and other inorganic coatings. Review of methods of measurement of thickness
    12/21/2022 - PDF - English -
    Learn More
    €24.00

  • SAE AMS 2263F:2022-12-20

    Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Aircraft Tubing
    12/20/2022 - PDF - English -
    Learn More
    €66.00

  • ASTM E2919-22 + Redline

    Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose
    12/15/2022 - PDF - English -
    Learn More
    €72.00

  • ASTM E2919-22

    Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose
    12/15/2022 - PDF - English -
    Learn More
    €60.00

  • 22/30449703 DC:2022

    BS EN ISO 18183-1. Geometrical product specifications (GPS). Partition Part 1. Basic concepts
    12/2/2022 - PDF - English -
    Learn More
    €24.00

  • DIN EN ISO 21920-3:2022-12

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021), German version EN ISO 21920-3:2022
    12/1/2022 - PDF - German -
    Learn More
    €104.95

  • DIN 66136-3:2022-12

    Determination of the degree of dispersion of metals using chemisorption - Part 3: Flow method
    12/1/2022 - PDF - German -
    Learn More
    €59.63

  • DIN EN ISO 18183-1:2022-12

    Geometrical product specifications (GPS) - Partition - Part 1: Terms, definitions and basic concepts (ISO/DIS 18183-1:2022), German and English version prEN ISO 18183-1:2022
    12/1/2022 - PDF - English, German -
    Learn More
    €85.79

  • PR NF EN ISO 18183-1, E04-572-1PR (12/2022)

    Spécification géométrique des produits (GPS) - Partition - Partie 1 : Termes, définitions et concepts de base
    12/1/2022 - Paper - English, French -
    Learn More
    €88.50

  • NF EN 12020-2, A50-640-2 (12/2022)

    Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : Tolerances on dimensions and form
    12/1/2022 - Paper - French -
    Learn More
    €75.67

  • DIN EN ISO 21920-1:2022-12

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021), German version EN ISO 21920-1:2022
    12/1/2022 - PDF - German -
    Learn More
    €136.82

  • DIN 66136-1:2022-12

    Determination of the degree of dispersion of metals using chemisorption - Part 1: Principles
    12/1/2022 - PDF - German -
    Learn More
    €59.63

  • 22/30449707 DC:2022

    BS EN ISO 18183-2. Geometrical product specifications (GPS). Partitioning Part 2. Nominal model
    12/1/2022 - PDF - English -
    Learn More
    €24.00

  • DIN 66139:2022-12

    Pore size analysis - Representation of pore size distributions
    12/1/2022 - PDF - German -
    Learn More
    €85.79

  • DIN EN ISO 18183-3:2022-12

    Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO/DIS 18183-3:2022), German and English version prEN ISO 18183-3:2022
    12/1/2022 - PDF - English, German -
    Learn More
    €99.35

  • DIN EN ISO 21920-2:2022-12

    Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06), German version EN ISO 21920-2:2022
    12/1/2022 - PDF - German -
    Learn More
    €179.72

  • DIN 66136-2:2022-12

    Determination of the degree of dispersion of metals using chemisorption - Part 2: Volumetric method
    12/1/2022 - PDF - German -
    Learn More
    €72.80

  • DIN EN ISO 18183-2:2022-12

    Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO/DIS 18183-2:2022), German and English version prEN ISO 18183-2:2022
    12/1/2022 - PDF - English, German -
    Learn More
    €65.89

  • 22/30449711 DC:2022

    BS EN ISO 18183-3. Geometrical product specifications (GPS). Partitioning Part 3. Methods used for specification and verification
    12/1/2022 - PDF - English -
    Learn More
    €24.00

  • NF E04-007 (12/2022)

    Geometrical product specifications (GPS) - Discrete modal decomposition - Analysis method
    12/1/2022 - Paper - French -
    Learn More
    €108.33

  • DIN EN ISO 5459/A1:2022-11

    Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems - Amendment 1 (ISO 5459:2011/DAM 1:2022), German and English version EN ISO 5459:2011/prA1:2022
    11/1/2022 - PDF - English, German -
    Learn More
    €120.84

  • 22/30449684 DC:2022

    BS EN ISO 5459:2011 AMD1. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    10/27/2022 - PDF - English -
    Learn More
    €24.00

  • UNE-EN ISO 1:2022

    Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022) (Endorsed by Asociación Española de Normalización in August of 2022.)
    10/12/2022 - PDF - English -
    Learn More
    €42.00

  • UNE-EN ISO 25178-700:2023

    Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022) (Endorsed by Asociación Española de Normalización in February of 2023.)
    10/12/2022 - PDF - English -
    Learn More
    €71.00

  • UNE-EN 15302:2022

    Railway Applications - Wheel-rail contact geometry parameters - Definitions and Methods for evaluation
    10/11/2022 - PDF - English -
    Learn More
    €177.60

  • UNE-EN 16165:2022

    Determination of slip resistance of pedestrian surfaces - Methods of evaluation
    10/11/2022 - PDF - English -
    Learn More
    €130.80

  • UNE-EN 16165:2022

    Determination of slip resistance of pedestrian surfaces - Methods of evaluation
    10/11/2022 - PDF - Spanish -
    Learn More
    €109.00

  • UNE-EN 15302:2022

    Railway Applications - Wheel-rail contact geometry parameters - Definitions and Methods for evaluation
    10/11/2022 - PDF - Spanish -
    Learn More
    €148.00

  • SAE AMS 2241T:2022-10-07

    Tolerances, Corrosion- and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
    10/7/2022 - PDF - English -
    Learn More
    €89.00

  • ASTM E284-22 + Redline

    Standard Terminology of Appearance
    10/1/2022 - PDF - English -
    Learn More
    €93.00

  • DIN EN ISO 1:2022-10

    Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022), German version EN ISO 1:2022
    10/1/2022 - PDF - German -
    Learn More
    €65.89

  • DIN ISO 8690:2022-10

    Measurement of radioactivity - Gamma ray and beta emitting radionuclides - Test method to assess the ease of decontamination of surface materials (ISO 8690:2020)
    10/1/2022 - PDF - German -
    Learn More
    €110.00

  • DIN EN ISO 22081:2022-10

    Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021), German version EN ISO 22081:2021
    10/1/2022 - PDF - German -
    Learn More
    €85.79

  • NF E22-621 (10/2022)

    Transmissions mécaniques - Assemblages frettés sur portée cylindrique - Fonction, réalisation, calcul
    10/1/2022 - Paper - French -
    Learn More
    €119.00

  • ASTM E284-22

    Standard Terminology of Appearance
    10/1/2022 - PDF - English -
    Learn More
    €78.00

  • DIN EN ISO 4351:2022-09

    Geometrical product specifications (GPS) - Association (ISO/DIS 4351:2022), German and English version prEN ISO 4351:2022
    9/1/2022 - PDF - English, German -
    Learn More
    €85.79

  • 22/30429469 DC:2022

    BS EN ISO 4351. Geometrical product specifications (GPS). Association
    8/22/2022 - PDF - English -
    Learn More
    €24.00

  • BS EN ISO 9220:2022 + Redline

    Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
    8/7/2022 - PDF - English -
    Learn More
    €235.00

  • DIN EN ISO 2692:2022-08

    Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021), German version EN ISO 2692:2021
    8/1/2022 - PDF - German -
    Learn More
    €158.04

  • BS EN ISO 9220:2022

    Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
    7/26/2022 - PDF - English -
    Learn More
    €180.00

  • BS EN ISO 1:2022 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
    7/25/2022 - PDF - English -
    Learn More
    €235.00

  • BS EN ISO 1:2022

    Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
    7/19/2022 - PDF - English -
    Learn More
    €180.00

  • NBN EN ISO 1:2022

    Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
    7/2/2022 - PDF - French -
    Learn More
    €37.00

  • NBN EN ISO 1:2022

    Geometrische Produktspezifikation (GPS) - Standardreferenztemperatur für die Spezifikation der geometrischen und maßlichen Eigenschaften (ISO 1:2022)
    7/2/2022 - PDF - German -
    Learn More
    €37.00

  • NBN EN ISO 1:2022

    Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
    7/2/2022 - PDF - English -
    Learn More
    €37.00

  • BS EN ISO 12179:2022 + Redline

    Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
    6/10/2022 - PDF - English -
    Learn More
    €326.00

  • UNE-EN 13523-7:2022

    Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
    6/8/2022 - PDF - English -
    Learn More
    €81.60

  • UNE-EN 13523-0:2022

    Coil coated metals - Test methods - Part 0: General introduction
    6/8/2022 - PDF - English -
    Learn More
    €62.40

  • UNE-EN 13523-9:2022

    Coil coated metals - Test methods - Part 9: Resistance to water immersion
    6/8/2022 - PDF - Spanish -
    Learn More
    €58.00

  • UNE-EN 13523-7:2022

    Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
    6/8/2022 - PDF - Spanish -
    Learn More
    €68.00

  • UNE-EN 13523-0:2022

    Coil coated metals - Test methods - Part 0: General introduction
    6/8/2022 - PDF - Spanish -
    Learn More
    €52.00

  • UNE-EN 13523-9:2022

    Coil coated metals - Test methods - Part 9: Resistance to water immersion
    6/8/2022 - PDF - English -
    Learn More
    €69.60

  • ASTM D7091-22 + Redline

    Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
    6/1/2022 - PDF - English -
    Learn More
    €61.00

  • ASTM E303-22 + Redline

    Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
    6/1/2022 - PDF - English -
    Learn More
    €61.00

  • NF EN ISO 1, E10-000 (06/2022)

    Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO/DIS 1:2021)
    6/1/2022 - Paper - French -
    Learn More
    €48.00

  • ASTM D7091-22

    Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
    6/1/2022 - PDF - English -
    Learn More
    €51.00

  • ASTM E303-22

    Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
    6/1/2022 - PDF - English -
    Learn More
    €51.00

  • BS EN ISO 12179:2022

    Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
    5/18/2022 - PDF - English -
    Learn More
    €250.00

Items 1 to 200 of 2189 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11